How To Change Light Bulb In Nutone Bathroom Fan

A well-lit bathroom is essential for safety and convenience. If the light bulb in your Nutone bathroom fan has burned out, you will need to replace it. This is a relatively simple task that can be completed in just a few minutes.

Gather Your Materials

Before you begin, you will need to gather the following materials:

New light bulb (check the manual for the correct type and wattage)
Screwdriver
Stepladder (if necessary)

Turn Off the Power

Before you start working on the lightbulb, be sure to turn off the power to the bathroom fan. You can do this by turning off the circuit breaker that controls the fan or by removing the fuse that powers it.

Remove the Light Bulb Cover

Once the power is off, you can remove the light bulb cover. The cover is typically held in place by a few screws. Once you have removed the screws, you should be able to pull the cover off.

Replace the Light Bulb

With the cover removed, you will now be able to access the light bulb. Simply unscrew the old bulb and screw in the new one. Be careful not to touch the bulb with your bare hands, as this can cause it to burn out prematurely.

Reattach the Light Bulb Cover

Once the new bulb is in place, you can reattach the light bulb cover. Simply align the cover with the holes in the fan housing and screw it back in place.

Turn on the Power

Once the cover is back in place, you can turn the power back on to the bathroom fan. The new light bulb should now be working.

Additional Tips

If you are having difficulty removing the light bulb cover, you may need to use a screwdriver to pry it off.
Be careful not to drop the screws when you are removing the light bulb cover.
If you are replacing the light bulb in a high ceiling, you may need to use a stepladder to reach it.
Always use a light bulb that is the same type and wattage as the old one.
If you are not comfortable working with electricity, you can hire a qualified electrician to change the light bulb for you.