How To Clean The Trap In A Bathroom Sink

How to Clean the Trap in a Bathroom Sink

A bathroom sink trap is a curved section of pipe beneath the sink. It's designed to hold a small amount of water, preventing sewer gases from escaping into your bathroom. Over time, this water can become clogged with hair, soap scum, and other debris, which can lead to slow drainage or even a complete clog.

Cleaning the trap is a simple task that you can do yourself with a few basic tools. Here's how to do it:

Step 1: Gather your tools.

You will need a bucket, a wrench, a pair of pliers, and a flashlight.

Step 2: Place the bucket under the trap.

This will catch any water that spills out when you remove the trap.

Step 3: Loosen the nuts on the trap.

There are typically two nuts that hold the trap in place. Use the wrench to loosen the nuts, but do not remove them completely.

Step 4: Remove the trap.

Once the nuts are loose, you can remove the trap by gently pulling it down. Be careful not to spill any water that may be trapped inside.

Step 5: Clean the trap.

Use the pliers to remove any hair or debris from the trap. You can also use a flashlight to inspect the inside of the trap for any other blockages.

Step 6: Reinstall the trap.

Once the trap is clean, you can reinstall it by reversing the steps above. Tighten the nuts on the trap until they are snug, but do not overtighten them.