How To Fit A New Bathroom Sink Taps

Replacing your bathroom sink taps is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can ensure that your new taps are fitted correctly and securely.

Before you begin, you will need to gather the following tools and materials:

* Adjustable wrench * Phillips head screwdriver * Flathead screwdriver * Plumber's putty * New sink taps ## Step-by-Step Instructions ### 1. Turn off the water supply

Locate the shut-off valves beneath the sink and turn them clockwise to turn off the water supply. Open the taps to release any remaining water from the lines.

### 2. Disconnect the old taps

Use the adjustable wrench to loosen the nuts that connect the old taps to the water supply lines. Be careful not to overtighten the nuts.

### 3. Remove the old taps

Once the nuts are loosened, you can remove the old taps by pulling them straight up. Be sure to support the taps as you remove them to prevent them from falling.

### 4. Clean the sink surface

Use a damp cloth to clean the sink surface around the tap holes. Remove any old plumber's putty or debris.

### 5. Apply plumber's putty

Roll out a small amount of plumber's putty into a rope and place it around the base of the new taps. This will help to create a watertight seal.

### 6. Insert the new taps

Insert the new taps into the tap holes in the sink. Be sure to align the taps correctly so that the handles are facing the desired direction.

### 7. Tighten the nuts

Use the adjustable wrench to tighten the nuts that connect the new taps to the water supply lines. Be sure to tighten the nuts securely, but do not overtighten them.

### 8. Turn on the water supply

Turn on the shut-off valves beneath the sink to turn on the water supply. Check for any leaks around the base of the taps.

### 9. Adjust the taps

Adjust the handles of the taps to the desired temperature and flow rate. You may need to use a screwdriver to adjust the set screws on the handles.

## Conclusion

By following these step-by-step instructions, you can easily fit new bathroom sink taps. With a little care and attention, you can ensure that your new taps are installed correctly and securely.