How To Fit Bathroom Basin

Fitting a bathroom basin is a common DIY task that can be completed in a few hours with the right tools and materials. It is important to follow the instructions carefully to ensure a successful installation. This article will provide you with a step-by-step guide on how to fit a bathroom basin.

Before you begin, you will need to gather the following tools and materials:

Bathroom basin
Pedestal or countertop
Taps
Waste and overflow kit
Spanner
Screwdriver
Plumber's mate
Silicone sealant

Once you have gathered all of the necessary tools and materials, you can begin the installation process.

Step 1: Prepare the Basin

The first step is to prepare the basin. This involves removing the old basin and cleaning the surface where the new basin will be installed. If you are installing a pedestal basin, you will also need to assemble the pedestal.

Step 2: Install the Waste and Overflow Kit

The waste and overflow kit is responsible for draining water from the basin. To install the waste and overflow kit, you will need to follow the manufacturer's instructions. Generally, this involves inserting the waste plug into the drain hole and securing it with a washer and nut. The overflow pipe should then be connected to the overflow hole and secured with a washer and nut.

Step 3: Install the Taps

The next step is to install the taps. To do this, you will need to insert the taps into the tap holes and secure them with a washer and nut. You will also need to connect the water supply lines to the taps.

Step 4: Fit the Basin

Once the taps are installed, you can fit the basin. To do this, you will need to lift the basin into place and align it with the waste and overflow kit. You will then need to secure the basin to the countertop or pedestal using the screws provided.

Step 5: Seal the Basin

The final step is to seal the basin. To do this, you will need to apply a bead of silicone sealant around the edge of the basin where it meets the countertop or pedestal. You will then need to smooth out the sealant with your finger or a damp cloth.

Once the sealant has dried, your new bathroom basin will be ready to use.