How To Fit Bathroom Ceiling Extractor Fan

How to Fit a Bathroom Ceiling Extractor Fan

A bathroom ceiling extractor fan is an essential appliance for any bathroom, as it helps to remove moisture and odours from the air. This can help to prevent mould and mildew from growing, and can also make the bathroom more comfortable to use. Fitting a ceiling extractor fan is a relatively simple task that can be completed in a few hours.

Materials you will need:

Ceiling extractor fan
Screwdriver
Drill
Wire cutters
Electrical tape
Caulk gun
Caulk

Instructions:

Turn off the electricity to the bathroom at the fuse box. This is important for safety reasons.
Remove the old ceiling extractor fan if there is one. To do this, simply unscrew the screws that hold it in place.
Mark the location of the new ceiling extractor fan on the ceiling. Make sure that it is centred over the bathroom and that there is enough space around it for the fan to operate properly.
Drill a hole in the ceiling for the fan. The hole should be slightly larger than the diameter of the fan's duct.
Feed the fan's duct through the hole in the ceiling. Make sure that the duct is properly sealed around the hole to prevent air leaks.
Connect the fan's wires to the electrical wires in the ceiling. Make sure that the wires are properly connected and that there are no loose connections.
Screw the fan into place on the ceiling. Make sure that the fan is securely fastened.
Apply a bead of caulk around the edge of the fan to seal any gaps and prevent air leaks.
Turn on the electricity to the bathroom at the fuse box.
Test the fan to make sure that it is working properly.

Tips:

When choosing a ceiling extractor fan, be sure to select one that is the right size for your bathroom. The fan should be able to move at least 50 cubic feet per minute (CFM) of air for every 100 square feet of bathroom space.
If you are not comfortable working with electricity, it is best to hire a qualified electrician to install the ceiling extractor fan for you.
Be sure to clean the ceiling extractor fan regularly to ensure that it is working properly.