How To Fit Bathroom Sink Mixer Taps

How to Fit Bathroom Sink Mixer Taps: A Guide to Getting the Job Done Right

Upgrading your bathroom taps is a relatively simple task that can bring a new lease of life to your bathroom. Mixer taps are a popular choice for bathrooms as they offer a single lever for controlling both hot and cold water, making them easy to use. If you are new to DIY or plumbing, fitting a bathroom sink mixer tap may seem a bit daunting. This guide will take you through everything you need to do, from start to finish.

Before You Start: Things to Consider

Before you start fitting your new bathroom sink mixer tap, there are a few things you need to keep in mind. Firstly, you will need to ensure that you have the correct tools for the job. This includes a set of adjustable spanners, a screwdriver, a hacksaw, and some PTFE tape.

You will also need to ensure that you have a good understanding of the plumbing in your bathroom. If you are not confident in your ability to do this, it is advisable to call a qualified plumber for assistance.

Step 1: Remove the Old Tap

The first step is to remove the old tap. To do this, you will need to use an adjustable spanner to loosen the nuts that hold the tap in place. Once the nuts are loose, you can pull the tap out of the sink.

Step 2: Install the New Tap

Once the old tap has been removed, you can install the new tap. To do this, you will need to insert the tap body into the hole in the sink. Once the tap body is in place, you can secure it with the nuts that came with the tap.

Step 3: Connect the Water Supply

The next step is to connect the water supply to the tap. To do this, you will need to use a flexible hose to connect the tap to the water supply pipes. Once the water supply is connected, you can turn on the water and check for leaks.

Step 4: Connect the Pop-Up Waste

Some sink mixer taps include a pop-up waste. This is a device that allows you to close the drain of your sink with a simple push of a button. If your tap includes a pop-up waste, you will need to install this before you can use the tap.

Step 5: Finish Up

Once the pop-up waste has been installed, you can finish fitting your new tap. To do this, you will need to insert the handle into the tap body. Once the handle is in place, you can secure it with the grub screw that came with the tap.

Your new bathroom sink mixer tap is now installed! You can enjoy the convenience of having a single lever to control both hot and cold water.