How To Fit New Bathroom Taps

How to Fit New Bathroom Taps: Essential Aspects to Consider

Installing new bathroom taps can enhance the functionality and aesthetics of your bathroom. However, it's crucial to consider various essential aspects to ensure a successful and long-lasting installation. This article explores the key factors to keep in mind when fitting new bathroom taps.

1. Tap Type and Compatibility

Determine the type of taps you require for your bathroom sink, whether it's a mixer tap, a basin tap, or a pillar tap. Consider the style, size, and material of the taps to ensure they complement your bathroom decor and fit properly with your sink.

2. Tools and Materials

Gather the necessary tools for the installation, including a wrench, pliers, screwdriver, and thread seal tape. Additionally, you may need an angle grinder or a hacksaw to cut copper pipes if required.

3. Shut Off the Water Supply

Before starting the installation, shut off the water supply to the bathroom. Locate the isolation valves under the sink or in a nearby location and turn them clockwise to stop the water flow.

4. Remove Old Taps

Disconnect the old taps by loosening the nuts holding them in place. If the nuts are corroded, use penetrating oil to loosen them. Once the nuts are removed, gently lift the old taps out of the sink.

5. Clean the Sink

Clean the sink area thoroughly to remove any debris or old sealant. This will ensure a proper seal for the new taps.

6. Install the New Taps

Apply thread seal tape to the threads of the new taps. Insert the taps into the sink holes and tighten the nuts securely using a wrench. Avoid overtightening to prevent damage to the taps or the sink.

7. Connect the Water Supply

Connect the water supply lines to the new taps. Ensure the hot water line is connected to the hot water tap and the cold water line to the cold water tap. Tighten the connections firmly using pliers.

8. Test and Adjust

Turn on the water supply and check for any leaks. If there are any, tighten the connections further or apply more thread seal tape. Adjust the taps as needed to ensure proper water flow and temperature.

Conclusion

Fitting new bathroom taps requires careful planning and execution. By considering the essential aspects discussed above, you can ensure a successful installation that will enhance the functionality and aesthetics of your bathroom for years to come.