How To Fix A Bathroom Dripping Faucet

Part of Speech

How To Fix A Bathroom Dripping Faucet is a noun phrase. ## Introduction A dripping faucet is a common household problem that can waste water and increase your water bill. It can also be a nuisance, especially if it's in a bathroom sink that you use frequently. There are many causes of a dripping faucet, but most of them are relatively easy to fix. In this article, we'll discuss the essential aspects of how to fix a bathroom dripping faucet. ## What You'll Need Before you start, you'll need to gather a few tools and materials. You'll need: * A pair of pliers * A screwdriver * A wrench * A replacement washer (if necessary) * A faucet repair kit (optional) ## Step-by-Step Instructions 1.

Turn off the water supply.

The first step is to turn off the water supply to the faucet. There should be two shutoff valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water. 2.

Remove the aerator.

The aerator is the small, round piece at the end of the faucet spout. It helps to create a stream of water that is less aerated and more forceful. To remove the aerator, simply unscrew it by hand. 3.

Remove the handle.

The handle is held in place by a screw. Use a screwdriver to remove the screw and then pull the handle off. 4.

Remove the cartridge.

The cartridge is the part of the faucet that controls the flow of water. To remove the cartridge, use a wrench to loosen the nut that holds it in place. Then, pull the cartridge out. 5.

Inspect the cartridge.

Once you have removed the cartridge, inspect it for any damage. If the cartridge is damaged, you will need to replace it. 6.

Replace the cartridge.

If the cartridge is not damaged, you can simply replace the washer. To do this, remove the old washer and place the new washer in its place. 7.

Reassemble the faucet.

Once you have replaced the cartridge or washer, reassemble the faucet in reverse order. First, insert the cartridge into the faucet body. Then, tighten the nut that holds the cartridge in place. Next, replace the handle and tighten the screw that holds it in place. Finally, replace the aerator. 8.

Turn on the water supply.

Once you have reassembled the faucet, turn on the water supply. Check for leaks and make sure that the faucet is working properly. ## Conclusion Fixing a bathroom dripping faucet is a relatively easy task that can be completed in a few minutes. By following the steps outlined in this article, you can save money on your water bill and avoid the annoyance of a dripping faucet.