How To Fix A Bathroom Tap Washer Hose Leaking

How to Fix a Bathroom Tap Washer Hose Leaking?

A leaking bathroom tap can be a real nuisance, not to mention a waste of water. If you're faced with this problem, don't despair - it's a relatively easy fix that you can do yourself with a few simple tools. Here's a step-by-step guide on how to fix a leaking bathroom tap washer hose:

1. Turn off the water supply to the tap. This is usually done by closing the stopcock beneath the sink. If there's no stopcock, you'll need to turn off the main water supply to your home.

2. Remove the aerator. This is the small attachment at the end of the tap that controls the flow of water. It can usually be removed by hand or with a wrench.

3. Remove the tap handle. This is usually done by unscrewing the small screw that's located at the base of the handle. Once the screw is removed, you should be able to pull the handle off.

4. Unscrew the packing nut. This is the large nut that's located at the base of the tap body. You can use a wrench to loosen it.

5. Remove the washer. The washer is a small rubber or plastic disc that's located inside the packing nut. It's responsible for creating a seal between the tap body and the handle.

6. Inspect the washer. If the washer is damaged or worn, it will need to be replaced. You can purchase a new washer at any hardware store.

7. Install the new washer. Make sure that the new washer is the same size and shape as the old one. Insert the washer into the packing nut and tighten it.

8. Reassemble the tap. Replace the packing nut, handle, and aerator. Turn on the water supply and check for leaks.

If you follow these steps, you should be able to fix a leaking bathroom tap washer hose in no time. However, if you're not comfortable doing this yourself, you can always call a plumber for help.