How To Fix A Leaky Bathroom Sink Drain Stopper

By | September 17, 2019

How to Fix a Leaky Bathroom Sink Drain Stopper

A leaky bathroom sink drain stopper can be a nuisance and waste water. If you're facing this issue, don't worry - fixing it is often a simple task that you can do yourself with a few basic tools. In this article, we'll walk you through the steps on how to fix a leaky bathroom sink drain stopper. Let's get started!

1. Gather Your Tools and Materials:

Before you start, make sure you have the following tools and materials:

  • Adjustable wrench
  • Pliers
  • Screwdriver
  • Replacement drain stopper
  • Plumber's putty
  • Damp cloth

2. Turn Off the Water Supply:

Before you begin working on the drain stopper, turn off the water supply to the sink. This will prevent water from leaking out while you're working.

3. Remove the Old Drain Stopper:

Using the adjustable wrench, loosen the locknut that holds the drain stopper in place. Once the locknut is loose, use your hands to remove the drain stopper from the sink.

4. Clean the Drain Assembly:

Use the damp cloth to clean the drain assembly thoroughly. Remove any dirt, debris, or old plumber's putty that may be present.

5. Apply Plumber's Putty:

Take a small amount of plumber's putty and roll it into a rope-like shape. Place the putty around the base of the new drain stopper, making sure to fill any gaps between the stopper and the sink.

6. Install the New Drain Stopper:

Insert the new drain stopper into the sink. Make sure that the plumber's putty is evenly distributed around the base of the stopper.

7. Tighten the Locknut:

Using the adjustable wrench, tighten the locknut until it is snug. Be careful not to overtighten the locknut, as this could damage the drain assembly.

8. Turn on the Water Supply:

Turn on the water supply to the sink and check for leaks. If you notice any leaks, tighten the locknut further until the leak stops.

9. Test the Drain Stopper:

Run some water into the sink and test the drain stopper. Make sure that the stopper opens and closes smoothly and that there are no leaks.

10. Final Check:

Once you're satisfied that the drain stopper is working properly, give the sink a final check to ensure there are no leaks. If everything looks good, you've successfully fixed the leaky bathroom sink drain stopper!

Conclusion:

Fixing a leaky bathroom sink drain stopper is a relatively simple task that can be done with a few basic tools and materials. By following the steps outlined in this article, you can easily resolve the issue and enjoy a leak-free sink.


How To Fix A Leaky Sink Drain Stopper

How To Fix A Leaky Sink Drain Stopper Plug Easy Do

Loose And Leaking Plastic Bathroom Sink

Loose And Leaking Plastic Bathroom Sink Drain Repair

Bathroom Sink Popup And Stopper Problems

Bathroom Sink Popup And Stopper Problems

Pop Up Drain

How To Stop A Drain From Leaking Pop Up

How To Replace A Sink Stopper Quick

How To Replace A Sink Stopper Quick And Simple Home Repair

A Sink Pop Up Drain Assembly

How To Replace Or Maintain A Sink Pop Up Drain Assembly

Bathroom Sink

Universal Washbasin Water Head Leaking Stopper Bathroom Sink Drain Strainer For And Bathtub Replacement Parts Silver Com

Loose And Leaking Plastic Bathroom Sink

Loose And Leaking Plastic Bathroom Sink Drain Repair

Bathroom Sink Drain Leaking Around

Bathroom Sink Drain Leaking Around Threads Premier Plumbing Inc

Mechanical Bathroom Sink Stopper

When Permanently Removing A Mechanical Bathroom Sink Stopper How Do You Prevent Water Leakage From The Hole Where Horizontal Pivot Rod Was Should Whole Tailpiece Be Replaced To Avoid This


Leave a Reply

Your email address will not be published. Required fields are marked *