How To Fix A Leaky Two Handle Delta Bathroom Faucet

A leaky faucet can be a real nuisance, not to mention a waste of water. If you have a leaky two-handle Delta bathroom faucet, don't worry - it's a relatively easy fix that you can do yourself with a few simple tools. Here's a step-by-step guide on how to do it:

1. Gather your tools. You will need a Phillips head screwdriver, an adjustable wrench, and a pair of pliers.

2. Turn off the water supply to the faucet. There are usually two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.

3. Remove the handle. Use the Phillips head screwdriver to remove the screw that holds the handle in place. Once the screw is removed, you can pull the handle straight up to remove it.

4. Remove the packing nut. The packing nut is located just below the handle. Use the adjustable wrench to loosen the packing nut and remove it.

5. Replace the washer. The washer is a small rubber washer that creates a seal between the packing nut and the handle. If the washer is worn or damaged, it can cause the faucet to leak. To replace the washer, simply remove the old washer and replace it with a new one.

6. Reinstall the packing nut. Once you have replaced the washer, reinstall the packing nut. Tighten the packing nut with the adjustable wrench until it is snug, but do not overtighten it.

7. Reinstall the handle. Push the handle back onto the faucet stem and tighten the screw to secure it.

8. Turn on the water supply. Turn on the shut-off valves under the sink to turn the water back on. Check to make sure that the faucet is no longer leaking.

If you have followed these steps and the faucet is still leaking, there may be a more serious problem with the faucet. In this case, you may need to call a plumber to have the faucet repaired or replaced.