How To Fix Dripping Moen Bathroom Faucet

How to Fix a Dripping Moen Bathroom Faucet

A dripping Moen bathroom faucet can be a nuisance, and it can also waste water and increase your water bill. Fortunately, fixing a dripping Moen bathroom faucet is a relatively simple task that can be completed in a matter of minutes. In this article, we will provide step-by-step instructions on how to fix a dripping Moen bathroom faucet.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

* Adjustable wrench * Phillips head screwdriver * Flat head screwdriver * Replacement O-rings (if necessary) * Plumber's grease

Step 1: Turn off the Water Supply

The first step is to turn off the water supply to the faucet. There will be two shut-off valves located under the sink. One valve will be for the hot water supply and the other valve will be for the cold water supply. Turn both valves clockwise to turn off the water supply.

Step 2: Remove the Handle

Once the water supply is turned off, you can remove the handle. To do this, use a Phillips head screwdriver to remove the screw that is located on the top of the handle. Once the screw is removed, you can pull the handle straight up to remove it.

Step 3: Remove the Cartridge

Once the handle is removed, you will see the cartridge. The cartridge is held in place by a C-clip. Use a flat head screwdriver to pry the C-clip off. Once the C-clip is removed, you can pull the cartridge straight up to remove it.

Step 4: Inspect the Cartridge

Once the cartridge is removed, inspect it for any damage. If the cartridge is damaged, it will need to be replaced. If the cartridge is not damaged, you can simply clean it with a cloth and some plumber's grease.

Step 5: Replace the O-Rings (if necessary)

If the cartridge is damaged or if the faucet is still dripping, you may need to replace the O-rings. The O-rings are located on the cartridge and on the faucet body. To replace the O-rings, simply use a flat head screwdriver to pry the old O-rings off. Then, apply a thin layer of plumber's grease to the new O-rings and install them on the cartridge and the faucet body.

Step 6: Reinstall the Cartridge

Once the O-rings are replaced, you can reinstall the cartridge. To do this, simply insert the cartridge into the faucet body and push down until it is seated. Then, install the C-clip to secure the cartridge in place.

Step 7: Reinstall the Handle

Once the cartridge is reinstalled, you can reinstall the handle. To do this, simply insert the handle into the faucet body and push down until it is seated. Then, use a Phillips head screwdriver to tighten the screw that is located on the top of the handle.

Step 8: Turn on the Water Supply

Once the handle is reinstalled, you can turn on the water supply. To do this, simply turn the shut-off valves counterclockwise. Once the water supply is turned on, check for any leaks. If there are no leaks, then you have successfully fixed the dripping Moen bathroom faucet.