How To Fix Leak Bathroom Sink Faucet

A leaky faucet can be a major annoyance, wasting water and increasing your utility bills. Fortunately, fixing a leaky bathroom sink faucet is a relatively simple task that can be completed in a few minutes with a few basic tools. ### Tools and Materials You'll Need: - Adjustable wrench - Phillips head screwdriver - Flathead screwdriver - Replacement washer (if needed) ### Step-by-Step Instructions: 1. Turn off the water supply to the faucet. There should be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water supply. 2. Open the faucet to release any remaining water in the lines. 3. Use the adjustable wrench to loosen the packing nut, which is located at the base of the faucet handle. 4. Remove the handle by pulling it straight up. 5. Use the Phillips head screwdriver to remove the screws that hold the faucet stem in place. 6. Pull out the faucet stem and inspect the washer. If the washer is damaged or worn, replace it with a new one. 7. Reassemble the faucet in the reverse order that you disassembled it. 8. Turn on the water supply and check for leaks. If there is still a leak, tighten the packing nut until the leak stops. ### Tips: - If you are not comfortable working on plumbing, it is best to call a plumber. - Always turn off the water supply before working on a faucet. - Be careful not to overtighten the packing nut, as this can damage the faucet. - If you have a two-handle faucet, you may need to replace the washers in both handles. ### Conclusion: Fixing a leaky bathroom sink faucet is a simple task that can be completed in a few minutes with a few basic tools. By following these steps, you can save water and money while keeping your bathroom looking its best.