How To Fix Moen Bathroom Faucet Handle

Essential Aspects: How To Fix Moen Bathroom Faucet Handle

When your Moen bathroom faucet handle becomes faulty, it can be a major inconvenience. A leaky handle can waste water and increase your water bill. A stiff handle can be difficult to turn, making it difficult to use your faucet effectively. Fortunately, fixing a Moen bathroom faucet handle is relatively easy and can be done with a few simple tools. Here is a step-by-step guide on how to fix a Moen bathroom faucet handle.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

Phillips head screwdriver
Flat head screwdriver
Allen wrench
New Moen faucet handle (if necessary)
Cloth or towel
Bucket or bowl

Step 1: Turn Off the Water Supply

The first step is to turn off the water supply to your faucet. This will prevent water from leaking out while you are working on the handle. To turn off the water supply, locate the shut-off valves under the sink. Turn the valves clockwise until they are fully closed.

Step 2: Remove the Handle Cap

Once the water supply is turned off, you can remove the handle cap. The handle cap is usually located at the base of the handle. Use a flat head screwdriver to pry off the cap. If the cap is difficult to remove, you can try using a pair of needle-nose pliers.

Step 3: Remove the Handle Screw

Once the handle cap is removed, you will see a screw holding the handle in place. Use a Phillips head screwdriver to remove the screw.

Step 4: Remove the Handle

Once the screw is removed, you can pull the handle straight up to remove it from the faucet. If the handle is stuck, you can try using a pair of pliers to gently pull it off.

Step 5: Inspect the Handle and Cartridge

Once the handle is removed, you can inspect it for any damage. If the handle is damaged, it will need to be replaced. You can also inspect the cartridge to see if it needs to be replaced. The cartridge is the part of the faucet that controls the flow of water. If the cartridge is damaged, it can cause the handle to leak or become stiff.

Step 6: Replace the Handle or Cartridge

If the handle or cartridge is damaged, it will need to be replaced. To replace the handle, simply insert the new handle into the faucet and tighten the screw. To replace the cartridge, follow the instructions that came with the new cartridge.

Step 7: Reassemble the Faucet

Once the handle or cartridge has been replaced, you can reassemble the faucet. To do this, simply insert the handle into the faucet and tighten the screw. Then, replace the handle cap.

Step 8: Turn On the Water Supply

Once the faucet is reassembled, you can turn on the water supply. Check for any leaks. If there are any leaks, you may need to tighten the screws or replace the cartridge.

Conclusion

Fixing a Moen bathroom faucet handle is a relatively easy task that can be completed in a few minutes. By following these steps, you can save yourself the time and expense of calling a plumber.