How To Install A Bathroom Light Fixture Without Junction Box

Installing a light fixture in your bathroom without a junction box can seem like a daunting task, but it doesn't have to be. With the right tools and a little bit of patience, you can get the job done in just a few hours. Here's a step-by-step guide to help you through the process:

Materials You'll Need:

Bathroom light fixture
Screwdriver
Wire stripper
Wire nuts
Ceiling fan canopy
Electrical tape

Step 1: Turn Off Power

Before you start working on the light fixture, make sure to turn off the power at the breaker panel. This will help prevent you from getting shocked.

Step 2: Remove the Old Fixture

If there is an existing light fixture in place, you'll need to remove it before you can install the new one. To do this, simply unscrew the nuts that are holding the fixture in place and carefully remove it from the ceiling.

Step 3: Prepare the Wires

Once the old fixture is removed, you'll need to prepare the wires for the new one. Using a wire stripper, strip about 1/2 inch of insulation from the end of each wire. Then, twist the exposed wires together and secure them with a wire nut.

Step 4: Mount the Ceiling Fan Canopy

The ceiling fan canopy is a metal bracket that will help to support the light fixture. To mount the canopy, simply screw it into the ceiling joists using the screws that are included with the fixture.

Step 5: Connect the Wires

Now it's time to connect the wires from the light fixture to the wires that are coming out of the ceiling. To do this, simply match the colors of the wires and twist them together. Then, secure the connection with a wire nut.

Step 6: Install the Light Fixture

Once the wires are connected, you can install the light fixture. To do this, simply lift the fixture up to the canopy and screw it into place.

Step 7: Turn on the Power

Once the light fixture is installed, you can turn the power back on at the breaker panel. Then, flip the switch to turn on the light and make sure that it's working properly.

Tips:

If you're not comfortable working with electricity, it's best to hire a qualified electrician to do the job for you.
Make sure to use the correct size wire nuts for the gauge of wire that you're using.
Don't overtighten the wire nuts, or you could damage the wires.
If you have any questions, consult the instructions that came with the light fixture.