How To Install Bathroom Cabinet Hardware

Essential Aspects of Installing Bathroom Cabinet Hardware

Upgrading the hardware on your bathroom cabinets can instantly refresh the look of your space. Whether you're replacing old hardware or adding it to new cabinets, this guide will provide you with all the essential aspects of successful installation.

1. Preparation

Before you start, gather the necessary tools and materials: a screwdriver, screws, a level (optional), and the new hardware. Measure the distance between the holes on the cabinet doors or drawers and make sure your new hardware has the same spacing. If not, you may need to drill new holes.

2. Alignment

For drawer pulls, use a level to ensure they are horizontally aligned. Place the level on top of the drawer front and mark the center points for the screw holes. For cabinet knobs, center them on the cabinet door or drawer front.

3. Screw Placement

Use the provided screws to secure the hardware. If your screws are too long, trim them slightly. For knobs, you may need to add washers to prevent them from loosening over time. Tighten the screws snugly, but avoid overtightening.

4. Adjustments

Once the hardware is installed, check for any adjustments that may be needed. The knobs should be securely attached and the drawer pulls should be easy to open and close. If any adjustments are necessary, carefully loosen the screws and make the necessary changes.

5. Finishing Touches

After all the hardware is installed, step back and admire your work. If you encounter any issues or have any remaining questions, don't hesitate to consult a professional hardware installer or your local home improvement store for assistance.