How To Install Bathroom Vanity With Legs

How to Install a Bathroom Vanity with Legs

Installing a bathroom vanity with legs is a relatively simple project that can be completed in a few hours. By following these step-by-step instructions, you can easily update the look of your bathroom without breaking the bank.

Materials and Tools You'll Need

* Bathroom vanity with legs * Basin and faucet * Drain assembly * Plumber's putty * Adjustable wrench * Level * Screwdriver * Measuring tape

Step-by-Step Instructions

1. Remove the Old Vanity

* Turn off the water supply to the sink. * Disconnect the water supply lines from the faucet. * Disconnect the drain assembly. * Remove the old vanity.

2. Install the Legs

* Measure the distance between the two legs and mark the location on the vanity. * Attach the legs to the vanity with screws. * Level the vanity by adjusting the legs as needed.

3. Install the Basin

* Apply a bead of plumber's putty around the rim of the basin. * Place the basin on the vanity and press down firmly. * Screw in the mounting bolts to secure the basin.

4. Install the Faucet

* Insert the faucet into the mounting holes in the basin. * Secure the faucet with nuts and washers. * Connect the water supply lines to the faucet.

5. Install the Drain Assembly

* Insert the drain flange into the drain hole in the basin. * Apply a bead of plumber's putty around the drain flange. * Screw on the drain body. * Install the pop-up drain stopper.

6. Connect the Plumbing

* Connect the drain assembly to the P-trap. * Connect the P-trap to the drain pipe. * Turn on the water supply and check for leaks.

Tips

* Use a level to ensure that the vanity is level before installing the basin and faucet. * Apply a generous amount of plumber's putty to prevent leaks. * Tighten all nuts and bolts securely, but do not overtighten. * If you are not comfortable installing the vanity yourself, hire a professional plumber.