How To Install Delta Two Handle Widespread Bathroom Faucet

How to Install Delta Two-Handle Widespread Bathroom Faucet

Installing a new bathroom faucet can update the look of your bathroom and enhance its functionality. This guide will provide detailed instructions on how to install a Delta two-handle widespread bathroom faucet, a popular and reliable choice for many homeowners.

Materials and Tools Required:

Delta two-handle widespread bathroom faucet
Adjustable wrench
Plumber's tape (Teflon tape)
Phillips head screwdriver
Flat head screwdriver
Basin wrench or channel locks
Caulk gun
Caulk
Bucket or bowl

Step 1: Prepare the Work Area

Start by turning off the water supply to the faucet using the shut-off valves located under the sink. Open the faucet handles to release any residual water. Place a bucket or bowl under the faucet to catch any dripping water.

Step 2: Remove the Old Faucet

Using an adjustable wrench, disconnect the water supply lines from the old faucet. Use a basin wrench or channel locks to loosen and remove the mounting nuts securing the faucet to the sink. Carefully lift the old faucet and remove it from the sink.

Step 3: Install the New Faucet Base

Apply a thin layer of plumber's tape to the threads of the mounting posts on the sink. Place the new faucet base on the sink and align the holes with the mounting posts. Secure the base by tightening the mounting nuts with an adjustable wrench.

Step 4: Install the Handles

Insert the handle assemblies into the corresponding holes in the faucet body. Use a Phillips head screwdriver to tighten the screws securing the handles.

Step 5: Connect the Water Supply Lines

Connect the hot and cold water supply lines to the faucet base using an adjustable wrench. Ensure that the lines are connected to the correct inlets, typically marked with red and blue indicators.

Step 6: Check for Leaks

Turn the water supply back on and open the faucet handles. Inspect all connections for leaks. If any leaks are detected, close the water supply and adjust the connections as needed.

Step 7: Apply Caulk

To prevent water damage around the faucet, apply a bead of silicone caulk around the base of the faucet where it meets the sink. Smooth the caulk with a damp finger or caulk tool.

Step 8: Finishing Touches

Wipe away any excess caulk or debris. Turn on the faucet and adjust the handles to ensure smooth operation. Your new Delta two-handle widespread bathroom faucet is now installed and ready to use.

Congratulations! You have successfully installed your Delta two-handle widespread bathroom faucet. Enjoy the updated look and functionality it adds to your bathroom.