How To Install Luxury Vinyl Tile In Bathroom Walls

How to Install Luxury Vinyl Tile on Bathroom Walls

Luxury vinyl tile (LVT) is a popular choice for bathroom walls because it is waterproof, durable, and easy to clean. It is also available in a wide variety of styles and colors, so you can find the perfect look for your bathroom.

Installing LVT on bathroom walls is a relatively easy project that can be completed in a few hours. However, there are a few things you need to do to ensure a successful installation.

Tools and materials

To install LVT on bathroom walls, you will need the following tools and materials:

LVT tiles
Adhesive
Notched trowel
Level
Tape measure
Pencil
Utility knife
Caulk gun
Caulk

Step 1: Prepare the walls

The first step is to prepare the walls for installation. This involves cleaning the walls and removing any dirt, dust, or debris. You should also sand down any rough spots or imperfections.

Once the walls are clean and smooth, you need to apply a primer. This will help the adhesive bond to the walls.

Step 2: Lay out the tiles

The next step is to lay out the tiles on the wall. This will help you determine how many tiles you need and how they will fit together.

To lay out the tiles, start by measuring the wall and marking the center. Then, place a tile in the center of the wall and use a level to make sure it is level. Continue adding tiles to the wall, working your way out from the center.

Step 3: Apply the adhesive

Once the tiles are laid out, you can start applying the adhesive. Use a notched trowel to apply a thin layer of adhesive to the back of each tile.

Be sure to spread the adhesive evenly and avoid getting any on the front of the tiles.

Step 4: Install the tiles

Once the adhesive is applied, you can start installing the tiles. Press each tile firmly into place and use a level to make sure it is level.

Continue installing the tiles until the wall is complete.

Step 5: Grout the tiles

Once the tiles are installed, you can grout them. Grout is a type of mortar that is used to fill the gaps between the tiles.

To grout the tiles, use a grout float to apply grout to the gaps between the tiles. Be sure to spread the grout evenly and avoid getting any on the front of the tiles.

Once the grout is applied, let it dry for 24 hours.

Step 6: Seal the tiles

The final step is to seal the tiles. This will help protect the tiles from moisture and stains.

To seal the tiles, use a tile sealer. Apply the sealer to the tiles and let it dry for 24 hours.

Tips for installing LVT on bathroom walls

Use a level to make sure the tiles are level.
Be sure to spread the adhesive evenly and avoid getting any on the front of the tiles.
Press each tile firmly into place.
Let the grout dry for 24 hours before sealing the tiles.
Seal the tiles to protect them from moisture and stains.