How To Install New Faucet In Bathroom

Give your bathroom a fresh new look by installing a new faucet. It's a relatively simple and inexpensive project that can make a big impact on the overall style of your space. Here's a step-by-step guide to help you get started.

1. Gather your tools and materials.

You will need the following tools and materials to install a new faucet:

Wrench
Basin wrench
Phillips screwdriver
Flathead screwdriver
Plumber's putty
New faucet

2. Turn off the water supply.

Start by turning off the water supply to your bathroom sink. There should be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to close them.

3. Disconnect the old faucet.

Use a basin wrench to loosen the nuts that hold the old faucet in place. Be careful not to overtighten the nuts, or you could damage the sink. Once the nuts are loose, you can remove the old faucet by pulling it straight up.

4. Clean the sink surface.

Before installing the new faucet, clean the sink surface where the faucet will be mounted. This will help to ensure a good seal. Apply a thin bead of plumber's putty around the base of the faucet.

5. Install the new faucet.

Insert the new faucet into the hole in the sink and tighten the nuts by hand until they are snug. Use the basin wrench to tighten the nuts further, but do not overtighten.

6. Connect the water supply lines.

Connect the water supply lines to the new faucet. The hot water line is typically on the left, and the cold water line is on the right. Use a wrench to tighten the connections.

7. Turn on the water supply and check for leaks.

Slowly turn on the water supply and check for leaks. If you see any leaks, tighten the connections until the leak stops. Open and close the faucet to make sure that it is working properly.

8. Finish the installation.

Insert the handles into the faucet and tighten the screws to secure them. Turn off the water and wipe down the faucet to remove any excess water or debris. Your new faucet is now installed and ready to use.