How To Install Sink Drain In Bathroom

How to Install a Sink Drain in a Bathroom

Installing a sink drain in a bathroom is a relatively simple task that can be completed in a few steps. By following these instructions, you can ensure that your new drain is properly installed and functioning correctly.

Materials Needed

New sink drain
Plumber's putty
Adjustable wrench
Putty knife
Flashlight

Step-by-Step Instructions

Remove the old drain. Use an adjustable wrench to loosen the nuts that hold the old drain in place. Once the nuts are loose, pull the drain out of the sink.
Clean the sink flange. Use a putty knife to remove any old plumber's putty from the sink flange. The flange is the metal ring that surrounds the drain hole in the sink.
Apply plumber's putty. Roll a small piece of plumber's putty into a rope and place it around the base of the new drain. The putty will help to seal the drain and prevent leaks.
Insert the new drain. Push the new drain into the sinkhole and tighten the nuts until they are snug. Do not overtighten the nuts, as this could damage the drain.
Check for leaks. Turn on the water and check for any leaks around the drain. If you see any leaks, tighten the nuts until the leak stops.

Tips

If you are having trouble getting the old drain out, you can use a flashlight to look inside the sink and see if there is any debris or buildup that is preventing the drain from coming out.
Be sure to use enough plumber's putty to seal the drain. If you do not use enough putty, the drain may leak.
Do not overtighten the nuts when installing the new drain. Overtightening can damage the drain and cause leaks.

By following these instructions, you can ensure that your new sink drain is properly installed and functioning correctly.