How To Put A Bathroom Faucet Back Together

How to Put a Bathroom Faucet Back Together

Putting a bathroom faucet back together can be a quick and easy task, provided that you have the right tools and a little bit of patience.
Here's a step-by-step guide to help you get the job done:

Tools and Materials

Screwdriver (Phillips or flathead, depending on the faucet)
Wrench (optional)
Replacement parts (if necessary)

Step 1: Turn Off the Water Supply

Before you start, turn off the water supply valves under the sink.

Step 2: Remove the Faucet Handle(s)

Locate the set screw on the base of the faucet handle and remove it with a screwdriver. Then, pull the handle straight up to remove it.

Step 3: Remove the Escutcheon Plate(s)

If your faucet has an escutcheon plate (the decorative cover around the base), remove it by unscrewing the screws that hold it in place.

Step 4: Remove the Cartridge or Stem

Using a wrench or screwdriver, remove the cartridge or stem by turning it counterclockwise.

Step 5: Inspect the Parts

Inspect the cartridge or stem for any damage. If the parts are damaged, replace them with new ones.

Step 6: Reassemble the Faucet

Insert the new or repaired cartridge or stem into the faucet body and tighten it clockwise.

Step 7: Reattach the Escutcheon Plate(s)

Reattach the escutcheon plate(s) to the faucet body and tighten the screws.

Step 8: Reinstall the Handle(s)

Push the faucet handle(s) back onto the stem(s) and tighten the set screw(s).

Step 9: Turn On the Water Supply

Turn on the water supply valves under the sink and check for leaks.

Step 10: Enjoy Your Newly Repaired Faucet

Congratulations! You've successfully put your bathroom faucet back together. Enjoy the satisfaction of a job well done!

Tips

Before you start, take pictures of the faucet so you can easily reference them during reassembly.
If you're not comfortable working on plumbing, it's best to call a qualified plumber.
If the faucet is leaking from the base, it may be necessary to replace the O-rings.