How To Remove A 4 Bulb Bathroom Light Fixture

How to Remove a 4 Bulb Bathroom Light Fixture

Removing a 4 bulb bathroom light fixture is a simple task that can be completed in a few minutes. However, it is important to follow the proper steps to avoid damaging the fixture or the electrical wiring.

Tools and Materials You'll Need

Phillips head screwdriver
Flat head screwdriver (optional)
Electrical tape
New light fixture (optional)

Step-by-Step Instructions

1. Turn off the power to the light fixture at the circuit breaker panel.

2. Remove the glass shades from the light fixture by unscrewing the screws that hold them in place.

3. Remove the light bulbs from the sockets by turning them counterclockwise.

4. Locate the screws that hold the light fixture to the ceiling and remove them with the Phillips head screwdriver.

5. Carefully pull the light fixture down from the ceiling, being careful not to damage the electrical wires.

6. Disconnect the electrical wires from the light fixture by unscrewing the wire nuts. Wrap electrical tape around the ends of the wires to prevent them from touching each other.

7. If you are installing a new light fixture, connect the wires to the new fixture according to the manufacturer's instructions.

8. Mount the new light fixture to the ceiling using the screws that came with the fixture.

9. Install the light bulbs and glass shades.

10. Turn on the power to the light fixture at the circuit breaker panel.