How To Remove A Bathroom Basin Mixer Tap

Whether you're replacing an old, leaky tap or simply giving your bathroom a fresh look, removing a basin mixer tap is a relatively straightforward task that can be completed in a few simple steps. Here are the essential aspects you need to consider:

Tools and Materials:

Adjustable wrench
Allen key (if necessary)
Cloth or towel
Bucket or container

Safety Precautions:

Turn off the water supply to the tap.
Open the tap to release any remaining water pressure.
Wear safety glasses and gloves if necessary.

Step-by-Step Instructions:

1. Disconnect the Water Supply: Locate the isolation valves or stopcocks under the sink and turn them clockwise to shut off the water supply. Use an adjustable wrench if needed. 2. Remove the Tap Aerator (if present): Unscrew the aerator at the end of the tap spout using your fingers or a wrench. It may be necessary to insert an Allen key into the aerator's base to loosen it. 3. Loosen the Mounting Nuts: Underneath the basin, locate the two mounting nuts that secure the tap to the basin. Use an adjustable wrench to loosen the nuts, turning them counterclockwise. Be careful not to overtighten them. 4. Disconnect the Water Hoses: Using an adjustable wrench, disconnect the flexible water hoses from the tap body. Hold a cloth or towel around the hose connections to catch any remaining water. 5. Lift the Tap Out: Once the mounting nuts and water hoses are disconnected, carefully lift the tap straight up and out of the basin. Place it in a bucket or container to avoid spills. 6. Clean the Surfaces: Use a damp cloth to clean the mounting surface on the basin and the underside of the tap. This will remove any residue or debris. Conclusion: Removing a bathroom basin mixer tap is a simple and straightforward process that requires basic tools and materials. By following these essential steps, you can safely and effectively remove your tap in preparation for replacement or repair.