How To Remove An American Standard Bathroom Faucet

Bathroom faucets, like any other plumbing fixture, are prone to wear and tear over time. Whether it's a leaky faucet or a complete replacement, knowing how to remove an American Standard bathroom faucet can save you time and money. This guide will provide a step-by-step process to help you remove your American Standard bathroom faucet and prepare for installation.

Before beginning the removal process, gather the necessary tools and materials:

Adjustable wrench
Phillips screwdriver
Hex key (optional)
Bucket or container for water
Cloth or rag
Replacement faucet (if necessary)

Now, let's dive into the essential steps on how to remove an American Standard bathroom faucet:

### 1. Turn Off the Water Supply

Safety first! Before you touch any plumbing, locate the water supply valves under the sink. Turn both the hot and cold water valves clockwise to the closed position. This will prevent water from flowing out when you disconnect the faucet.

### 2. Open the Faucet

Open the faucet handle to release any remaining water pressure. This will make it easier to remove the faucet later on.

### 3. Disconnect the Water Supply Lines

Using an adjustable wrench, carefully loosen the nuts that connect the water supply lines to the faucet. The nuts are usually located where the lines meet the base of the faucet. Be careful not to overtighten or damage the supply lines.

### 4. Remove the Handle(s)

Depending on the type of faucet, you may have one or two handles. Most American Standard bathroom faucets have a screw located under a small cap at the base of the handle. Remove this screw using a Phillips screwdriver. Once the screw is removed, gently pull the handle straight up to detach it.

### 5. Remove the Cartridge

The cartridge is the core component of the faucet that controls water flow. To remove the cartridge, you may need a hex key or a special tool provided by the manufacturer. Insert the tool into the center of the faucet and turn it counterclockwise to loosen the cartridge. Once loose, pull the cartridge straight up to remove it.

### 6. Remove the Base Plate

The base plate is the metal plate that secures the faucet to the sink. Using an adjustable wrench, loosen the nuts that hold the base plate in place. Once the nuts are loose, gently lift the faucet straight up to detach it from the sink.

### 7. Clean and Inspect

Before installing the new faucet, take a moment to clean the sink surface and inspect the old faucet for any signs of damage or corrosion. This will help ensure a proper installation and prevent future leaks.

### Conclusion

Removing an American Standard bathroom faucet may seem daunting, but by following these essential steps, you can tackle the job efficiently. Remember to turn off the water supply, open the faucet, disconnect the water supply lines, remove the handle(s), cartridge, and base plate, and clean the area before installing the new faucet. With these steps, you'll be equipped to replace your American Standard bathroom faucet and enjoy a leak-free bathroom experience.

Studio Bath And Shower Faucet From American Standard

American Standard Bathroom Faucet Installation Guide

How To Replace A Leaking Bathroom Faucet Cartridge

Repair American Standard Shower Faucet

American Standard Tub Faucet Handle Stuck On Stem Doityourself Com Community Forums

Repair American Standard Shower Faucet

American Standard Rumson 8 In Widespread Bathroom Faucet And Single Handle 1 Spray Shower Polished Chrome Valve Included Rumsonsowidech The Home Depot