How To Remove Bathroom Tub Faucet Handle

How to Remove a Bathroom Tub Faucet Handle

Removing a bathroom tub faucet handle can be a relatively simple task that can be completed with a few basic tools. Before starting, it's important to turn off the water supply to the faucet to prevent water from leaking out once the handle is removed.

Once the water is turned off, you can begin the removal process. The first step is to locate the small set screw that is typically located on the bottom of the handle. Using a screwdriver, carefully remove the set screw.

With the set screw removed, you can now gently pull the handle straight up and off the faucet stem. In some cases, the handle may be held in place with a plastic clip. If this is the case, use a small flathead screwdriver to gently pry the clip out of place.

Once the handle is removed, you will have access to the faucet stem. The stem is typically secured with a packing nut, which can be loosened using a wrench or pliers. Once the packing nut is loosened, you can remove the stem by turning it counterclockwise.

With the stem removed, you can now clean and inspect the faucet components. If the stem is worn or damaged, it may need to be replaced. You can also clean the packing nut and housing to ensure a good seal when the faucet is reassembled.

To reassemble the faucet, simply reverse the steps of the removal process. Insert the new stem into the housing and tighten the packing nut. Then, replace the handle and secure it with the set screw.

Once the faucet is reassembled, turn the water supply back on and check for leaks. If there are no leaks, the repair is complete.