How To Remove Bathroom Vanity Tile

Removing bathroom vanity tile can be a daunting task, but it's definitely doable with the right tools and a little bit of patience. Here are the steps on how to do it:

Step 1: Safety First

Before you start, make sure to turn off the water supply to your bathroom and wear a dust mask to avoid inhaling any dust or debris.

Step 2: Remove the Vanity

Start by removing the vanity from the wall. This will give you more space to work and make it easier to remove the tile.

Step 3: Remove the Backsplash

If your vanity has a backsplash, you'll need to remove it before you can remove the tile. To do this, carefully pry the backsplash away from the wall using a putty knife or a flathead screwdriver.

Step 4: Score the Tile

Once the backsplash is removed, you can start scoring the tile. This will help to loosen the tile and make it easier to remove.

Step 5: Remove the Tile

Now it's time to remove the tile. Use a hammer and chisel to carefully break the tile into smaller pieces. Be careful not to damage the wall behind the tile.

Step 6: Clean the Wall

Once the tile is removed, you'll need to clean the wall to remove any remaining adhesive or grout. Use a sponge and some soapy water to clean the wall.

Step 7: Install New Tile

Now you're ready to install new tile. Apply a thin layer of adhesive to the back of the new tile and press it into place. Use a level to make sure the tile is level.

Step 8: Grout the Tile

Once the tile is installed, you'll need to grout it. Apply a thin layer of grout to the joints between the tiles. Use a grout float to smooth the grout and remove any excess.

Step 9: Seal the Grout

To protect the grout from water damage, you'll need to seal it. Apply a thin layer of grout sealer to the grout and let it dry.

And that's it! You've now successfully removed and replaced the tile on your bathroom vanity.