How To Remove Delta Two Handle Bathroom Faucet

Delta Two Handle Bathroom Faucets are a common feature in many bathrooms. They’re usually made of brass or stainless steel and feature two separate handles for hot and cold water. While these faucets are generally durable, they may need to be replaced or repaired at some point.

If you’re planning to replace or repair a Delta Two Handle Bathroom Faucet, it’s important to know how to remove it first. Here are the steps on how to do it:

Materials you’ll need:

1. Adjustable wrench or pliers 2. Allen wrench 3. Screwdriver 4. Bucket or bowl 5. Towels or rags

Step 1: Turn off the water supply

Before you start working on the faucet, it’s important to turn off the water supply. There should be two shut-off valves under the sink. Turn the valves clockwise to close them.

Step 2: Remove the handle caps

The handle caps are usually made of plastic or metal. They can be removed by hand or with a screwdriver. If the caps are difficult to remove, you can try using a pair of pliers.

Step 3: Remove the handle screws

Once the handle caps are removed, you’ll see two screws underneath. These screws hold the handles in place. Use an Allen wrench or a screwdriver to remove the screws.

Step 4: Remove the handles

Once the screws are removed, you can pull the handles straight up to remove them.

Step 5: Remove the escutcheon plate

The escutcheon plate is the decorative plate that covers the base of the faucet. It’s usually held in place by a few screws. Use a screwdriver to remove the screws and then lift the escutcheon plate off.

Step 6: Loosen the packing nuts

The packing nuts are located at the base of the faucet. They hold the faucet in place and prevent leaks. Use an adjustable wrench or pliers to loosen the packing nuts.

Step 7: Remove the faucet

Once the packing nuts are loose, you can remove the faucet by lifting it straight up.

Step 8: Clean the faucet and the sink

Once the faucet is removed, you can clean the faucet and the sink. Use a mild detergent and a soft cloth to clean the surfaces.

Step 9: Install the new faucet

If you’re replacing the faucet, follow the installation instructions that came with the new faucet. Generally, you’ll need to reverse the steps above to install the new faucet.

Tips:

1. If you’re not comfortable removing the faucet yourself, you can call a plumber for assistance. 2. Be careful not to overtighten the packing nuts. This can damage the faucet. 3. If you’re replacing the faucet, make sure to use a faucet that is compatible with your sink. 4. Always turn off the water supply before working on any plumbing fixtures.