How To Remove Hunter Bathroom Fan Light Cover

If you need to access the motor or light bulb of your Hunter bathroom fan, you'll need to remove the light cover. Here's a step-by-step guide on how to do it safely:

Step 1: Shut off the power Before you start, make sure to turn off the power to the bathroom fan at the circuit breaker or fuse box. This will prevent you from getting shocked.

Step 2: Remove the screws Most Hunter bathroom fan light covers are held in place by two or three screws. Use a screwdriver to remove these screws, being careful not to drop them. Once the screws are removed, the light cover should come off easily.

Step 3: Disconnect the wires If the light cover is wired, you'll need to disconnect the wires before you can remove it. Use a pair of pliers or a screwdriver to carefully disconnect the wires. Make sure to keep track of which wire goes where so that you can reconnect them properly later.

Step 4: Remove the light cover Once the wires are disconnected, you should be able to remove the light cover. Be careful not to drop it, as it could break.

Step 5: Replace the light bulb or motor If you're replacing the light bulb, simply screw in a new one. If you're replacing the motor, you'll need to follow the manufacturer's instructions.

Step 6: Reinstall the light cover Once you've replaced the light bulb or motor, you can reinstall the light cover. Make sure to align the light cover properly before screwing it back in place.

Step 7: Reconnect the wires If the light cover is wired, you'll need to reconnect the wires before you can turn the power back on. Make sure to connect the wires properly, and then tighten the screws.

Step 8: Turn the power back on Once the wires are reconnected, you can turn the power back on at the circuit breaker or fuse box. Your Hunter bathroom fan should now be working properly.