How To Remove Old Faucet In Bathroom Sink

How to Remove an Old Faucet in a Bathroom Sink

Updating your bathroom faucet is a relatively simple task that can give your bathroom a fresh new look. But before you can install a new faucet, you need to remove the old one. Here's a step-by-step guide on how to do it:

1. Turn off the water supply.

The first step is to turn off the water supply to the sink. There are usually two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water.

2. Disconnect the water supply lines.

Once the water supply is turned off, you can disconnect the water supply lines from the faucet. There are usually two nuts that hold the water supply lines in place. Use a wrench to loosen the nuts and then pull the water supply lines off the faucet.

3. Remove the faucet handle(s).

Most faucets have two handles, one for hot water and one for cold water. To remove the handles, you need to remove the screws that hold them in place. The screws are usually located on the top or side of the handles.

4. Remove the faucet cartridge (if applicable).

Some faucets have a cartridge that controls the flow of water. To remove the cartridge, you need to remove the screw that holds it in place. The screw is usually located on the top of the faucet.

5. Remove the faucet base.

The faucet base is the part of the faucet that is attached to the sink. To remove the faucet base, you need to remove the nuts that hold it in place. The nuts are usually located under the sink.

6. Pull the faucet out of the sink.

Once the faucet base is removed, you can pull the faucet out of the sink. Be careful not to damage the sink or the faucet.

Tips:

Here are a few tips for removing an old faucet:

If the nuts are corroded, you may need to use a penetrating lubricant to loosen them.
Be careful not to overtighten the nuts when you are reattaching the new faucet.
If you are not comfortable removing the old faucet yourself, you can call a plumber to do it for you.