How To Remove The Bathroom Sink

How to Remove a Bathroom Sink

Replacing a bathroom sink is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can remove your old sink and install a new one with ease.

Tools and Materials

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Bucket
Sponge
New sink
Faucet
Faucet wrench (if necessary)
Plumber's putty
Caulk gun
Caulk

Step 1: Turn Off the Water Supply

Before you begin, turn off the water supply to the sink. This is usually done by turning the handles on the shut-off valves located under the sink. If you do not have shut-off valves, you will need to turn off the main water supply to your home.

Step 2: Disconnect the Water Lines

Once the water supply is turned off, disconnect the water lines from the sink. Use an adjustable wrench to loosen the nuts on the water lines and then remove the lines with your hands.

Step 3: Disconnect the Drain Pipe

Next, disconnect the drain pipe from the sink. Place a bucket under the drain to catch any water that remains in the pipe. Use a flat head screwdriver to loosen the collar on the drain pipe and then remove the pipe with your hands.

Step 4: Remove the Sink

Now, you can remove the sink. Carefully lift the sink up and off the vanity. Be sure to support the weight of the sink as you lift it.

Step 5: Install the New Sink

Place the new sink on the vanity and align it with the holes for the water lines and drain pipe.

Step 6: Connect the Drain Pipe

Connect the drain pipe to the sink. Apply a bead of plumber's putty to the flange of the drain pipe and then insert the pipe into the drain hole in the sink. Tighten the collar on the drain pipe with a screwdriver.

Step 7: Connect the Water Lines

Connect the water lines to the sink. Apply a bead of plumber's putty to the threads of the water lines and then screw the lines into the water supply valves on the sink.

Step 8: Install the Faucet

Install the faucet on the sink. Apply a bead of caulk around the base of the faucet and then insert the faucet into the holes in the sink. Tighten the nuts on the faucet with a wrench.

Step 9: Turn On the Water Supply

Once the faucet is installed, turn on the water supply and check for leaks. If there are any leaks, tighten the connections or apply more plumber's putty.

Step 10: Caulk Around the Sink

Finally, caulk around the sink to seal it and prevent water from leaking. Apply a bead of caulk around the perimeter of the sink and then smooth it out with your finger.