How To Remove Water Supply Line From Bathroom Sink

How to Remove a Water Supply Line From a Bathroom Sink

Replacing or repairing a bathroom sink faucet often requires removing the water supply lines. This task can be completed in a few simple steps, ensuring water is disconnected safely.

Tools Required:

Adjustable wrench
Bucket or rags

Safety Precautions:

Turn off both hot and cold water supply valves under the sink.
Open the sink faucet to release any remaining water.

Instructions:

Step 1: Locate the Water Supply Lines
Identify the flexible hoses or rigid pipes that connect the faucet to the water supply valves.

Step 2: Place a Bucket or Rags
Place a bucket or rags under the water supply lines to collect any water that may drain.

Step 3: Loosen the Connection to the Faucet
Using an adjustable wrench, loosen the nuts that connect the water supply lines to the faucet.

Step 4: Loosen the Connection to the Water Supply Valves
Carefully loosen the nuts that connect the water supply lines to the water supply valves.

Step 5: Remove the Water Supply Lines
Once the connections are loose, gently pull the water supply lines away from the connections to detach them.

Step 6: Inspect and Clean
Inspect the water supply lines for any damage or leaks. Clean the connections on the faucet and water supply valves using a rag.

Tips:

If the nuts are stuck, use a lubricant to loosen them.
If you encounter leaks, tighten the nuts further.
If the water supply lines are old or rusty, it's recommended to replace them with new ones.

Removing water supply lines from a bathroom sink is a simple task that can be completed in a few minutes. By following these instructions carefully, you can ensure a safe and successful removal.