How To Repair A Bathroom Sink Drain Stopper

How to Repair a Bathroom Sink Drain Stopper

The drain stopper in your bathroom sink is an essential part of keeping water in the sink and preventing it from going down the drain. When the drain stopper is not working properly, it can be a major inconvenience. Fortunately, repairing a drain stopper is a relatively simple task that can be completed in a few minutes.

The first step is to remove the old drain stopper. To do this, simply unscrew the cap on the top of the drain stopper and pull it out. If the drain stopper is stuck, you may need to use a pair of pliers to loosen it.

Once the old drain stopper is removed, you can clean the drain hole. Use a brush or a sponge to remove any debris that may be blocking the hole. You can also use a vinegar and baking soda solution to clean the drain hole. To do this, pour 1/2 cup of vinegar down the drain hole, followed by 1/2 cup of baking soda. Let the solution sit for 15 minutes, then flush the drain with hot water.

Now you can install the new drain stopper. To do this, simply insert the drain stopper into the drain hole and tighten the cap on top. Make sure that the drain stopper is tightened securely, but do not overtighten it.

Once the new drain stopper is installed, test it to make sure that it is working properly. To do this, fill the sink with water and then plug the drain. The water should stay in the sink, and there should be no leaks.

If the drain stopper is still not working properly, there may be a problem with the drainpipe. To check the drainpipe, remove the P-trap under the sink. The P-trap is the U-shaped pipe that connects the drain to the sink. If the P-trap is clogged, it will need to be cleaned. To clean the P-trap, simply remove the nuts that hold it in place and then pull it apart. Use a brush or a sponge to remove any debris that may be blocking the P-trap. Once the P-trap is clean, reassemble it and tighten the nuts.