How To Repair A Chipped Bathroom Sink

How to Repair a Chipped Bathroom Sink

Chipped bathroom sinks are a common problem, but they don't have to be a major inconvenience. With a few simple steps, you can repair a chipped sink and restore it to its original condition.

Materials You'll Need

Sandpaper (120-grit and 220-grit)
Epoxy resin
Mixing bowl and stir stick
Putty knife
Fine-grit polishing compound
Soft cloth

Step-by-Step Instructions

1. Prepare the Surface

Start by cleaning the chipped area with a degreaser to remove any dirt or debris. Then, sand the area with 120-grit sandpaper to roughen the surface and create a bond for the epoxy.

2. Mix the Epoxy

In a mixing bowl, combine the epoxy resin and hardener according to the manufacturer's instructions. Stir thoroughly until the mixture is smooth and free of lumps.

3. Apply the Epoxy

Using a putty knife, apply a thin layer of epoxy to the chipped area. Fill the chip completely, but don't overfill it. Smooth the epoxy flush with the surrounding surface.

4. Cure the Epoxy

Allow the epoxy to cure for the recommended amount of time (usually 24-48 hours). Once cured, the epoxy will be hard and durable.

5. Sand and Polish

After the epoxy has cured, sand the repaired area with 220-grit sandpaper to smooth the surface. Then, polish the area with a fine-grit polishing compound and a soft cloth to restore its shine.

Tips

Choose an epoxy that is specifically designed for repairing chipped sinks.
If the chip is large or deep, you may need to apply multiple layers of epoxy.
Protect your skin and eyes when working with epoxy by wearing gloves and safety glasses.
For a stronger repair, you can reinforce the epoxy with fiberglass cloth.
If the chip is located on the edge of the sink, you can use a diamond bit to grind a bevel into the edge before applying the epoxy.

Conclusion

Repairing a chipped bathroom sink is a relatively simple and inexpensive task that can be completed in a few hours. By following these steps, you can restore your sink to its original condition and save yourself the cost of a replacement.