How To Repair A Dripping Delta Bathroom Faucet

How to Repair a Dripping Delta Bathroom Faucet

A dripping bathroom faucet is not only annoying, but it can also waste a significant amount of water. If you have a Delta bathroom faucet that is dripping, you can easily repair it yourself with a few simple tools. In this article, we will provide you with a step-by-step guide on how to repair a dripping Delta bathroom faucet.

Step 1: Gather the necessary tools

To repair a dripping Delta bathroom faucet, you will need the following tools: * Phillips head screwdriver * Adjustable wrench * Allen wrench * Paper towels * Toothbrush (optional)

Step 2: Turn off the water supply

Before you begin repairing the faucet, you need to turn off the water supply. The shut-off valves are usually located under the sink. Once you have turned off the water supply, open the faucet to release any remaining water.

Step 3: Remove the handle

Use the Phillips head screwdriver to remove the handle from the faucet. There will be a small screw located on the side of the handle. Once you have removed the screw, pull the handle straight up to remove it from the faucet.

Step 4: Remove the cartridge

Once you have removed the handle, you will see the cartridge. The cartridge is held in place by a nut. Use the adjustable wrench to loosen the nut and remove the cartridge.

Step 5: Inspect the cartridge

Once you have removed the cartridge, inspect it for any damage. If the cartridge is damaged, it will need to be replaced. You can purchase a new cartridge at your local hardware store.

Step 6: Clean the cartridge seat

Use the toothbrush to clean the cartridge seat. The cartridge seat is located inside the faucet body. Be sure to remove any debris or buildup from the cartridge seat.

Step 7: Install the new cartridge

If the cartridge is damaged, you will need to install a new one. To install the new cartridge, simply insert it into the cartridge seat and tighten the nut.

Step 8: Reinstall the handle

Once you have installed the new cartridge, you can reinstall the handle. To reinstall the handle, simply insert it into the faucet body and tighten the screw.

Step 9: Turn on the water supply

Once you have reinstalled the handle, you can turn on the water supply. Check for any leaks. If there are no leaks, your faucet is now repaired.

Tips for preventing future drips

Here are a few tips for preventing future drips from your Delta bathroom faucet: * Regularly clean the cartridge seat. * Replace the cartridge every few years. * Do not overtighten the cartridge nut. * If you have a leak, repair it immediately.