How To Repair Clogged Bathroom Sink

How to Repair a Clogged Bathroom Sink

A clogged bathroom sink is a common plumbing problem that can be easily fixed with a few simple tools and materials. Follow these steps to unclog your sink in no time.

1. Gather Your Tools and Materials

You will need the following tools and materials:

Plunger
Drain snake
Bucket
Baking soda
Vinegar

2. Remove the Stopper

If your sink has a stopper, remove it by pulling it up. If the stopper is stuck, you can use a pair of pliers to gently pry it loose.

3. Plunge the Drain

Place the plunger over the drain and push and pull vigorously. This will create suction that will help to dislodge the clog.

4. Use a Drain Snake

If plunging the drain does not work, you can try using a drain snake. Insert the snake into the drain and turn the handle clockwise. The snake will bore through the clog and break it up.

5. Pour in Baking Soda and Vinegar

If the clog is still not cleared, you can try pouring a cup of baking soda down the drain followed by a cup of vinegar. The baking soda and vinegar will create a fizzing reaction that can help to dissolve the clog.

6. Flush the Drain with Hot Water

Once the clog is cleared, flush the drain with hot water to remove any remaining debris.

7. Prevent Future Clogs

To prevent future clogs, avoid pouring grease or food down the drain. Also, be sure to clean the drain stopper regularly.

Additional Tips

If you have a double sink, be sure to close the drain on the other side before plunging.
If the clog is severe, you may need to call a plumber.
Be careful not to use too much force when plunging or using a drain snake, as you could damage the pipes.