How To Replace A Bathroom Sink Handle

How to Replace a Bathroom Sink Handle

Replacing a bathroom sink handle is a simple task that can be completed in a few minutes. By following these steps, you can save yourself the cost of hiring a plumber.

Step 1: Gather Your Tools

You will need the following tools to replace a bathroom sink handle:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
New bathroom sink handle

Step 2: Turn Off the Water Supply

Before you begin, turn off the water supply to the sink. There are usually two valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to shut off the water.

Step 3: Remove the Old Handle

Use the adjustable wrench to loosen the nut that holds the handle in place. Once the nut is loose, you can pull the handle off the stem.

Step 4: Remove the Cartridge

Once the handle is removed, you will see the cartridge. The cartridge is a small, cylindrical piece that controls the flow of water. Use the Phillips head screwdriver to remove the screws that hold the cartridge in place. Once the screws are removed, you can pull the cartridge out of the faucet.

Step 5: Install the New Cartridge

Insert the new cartridge into the faucet. Make sure that the cartridge is properly seated and that the O-rings are in place.

Step 6: Install the New Handle

Place the new handle on the stem and tighten the nut. Do not overtighten the nut, or you could damage the handle.

Step 7: Turn On the Water Supply

Turn on the water supply to the sink. Check for leaks around the handle and the cartridge. If there are any leaks, tighten the nut or replace the O-rings.

Conclusion

Replacing a bathroom sink handle is a simple task that can be completed in a few minutes. By following these steps, you can save yourself the cost of hiring a plumber.