How To Replace A Bathroom Spout

How to Replace a Bathroom Spout

Replacing a bathroom spout is a relatively straightforward task that can be completed in a few hours. However, it is important to follow the instructions carefully to avoid any leaks or damage to the plumbing.

Understanding the different types of bathroom spouts

There are two main types of bathroom spouts: centerset and widespread. Centerset spouts are mounted on a single hole in the sink, while widespread spouts are mounted on three separate holes. The type of spout you choose will depend on the style of your sink and the number of holes you have available.

Gathering the necessary tools and materials

Once you have chosen a new bathroom spout, you will need to gather the following tools and materials: * Adjustable wrench * Basin wrench * Plumber's putty * Teflon tape * New spout * Flashlight (optional)

Removing the old bathroom spout

1. Turn off the water supply to the sink. 2. Open the faucet to release any remaining water. 3. Use an adjustable wrench to loosen the nuts that hold the spout in place. 4. Be careful not to overtighten the nuts, as this could damage the spout. 5. Once the nuts are loose, use your hands to remove the spout.

Installing the new bathroom spout

1. Apply a bead of plumber's putty around the base of the new spout. 2. Wrap a few layers of Teflon tape around the threads of the spout. 3. Hand-tighten the spout onto the sink. 4. Use an adjustable wrench to tighten the nuts that hold the spout in place. 5. Be sure to tighten the nuts just enough to prevent leaks. 6. Turn on the water supply to the sink and check for leaks. 7. If there are any leaks, tighten the nuts further until the leaks stop.