How To Replace A Nutone Bathroom Fan Motor

How to Replace a Nutone Bathroom Fan Motor

A bathroom fan is an essential part of any home, helping to remove moisture, odors, and pollutants from the air. Over time, the motor in a bathroom fan can wear out and need to be replaced. Replacing a Nutone bathroom fan motor is a relatively simple task that can be completed in a few hours.

Before you begin, you will need to gather the following tools and materials:

New Nutone bathroom fan motor
Screwdriver
Wire cutters
Electrical tape
Safety glasses

Once you have gathered your tools and materials, you can begin the replacement process.

Step 1: Safety First

Before you do anything else, make sure to turn off the power to the bathroom fan at the circuit breaker.

Step 2: Remove the Old Motor

Once the power is off, you can remove the old motor. To do this, simply unscrew the screws that hold the motor in place and pull the motor straight out.

Step 3: Disconnect the Wires

Once the motor is removed, you will need to disconnect the wires from the motor. To do this, simply use a pair of wire cutters to cut the wires close to the motor. Be sure to cap the ends of the wires with electrical tape to prevent them from shorting out.

Step 4: Install the New Motor

Now you can install the new motor. To do this, simply insert the motor into the housing and screw it into place. Be sure to connect the wires to the motor in the same way they were connected to the old motor.

Step 5: Test the Fan

Once the new motor is installed, you can turn the power back on and test the fan. To do this, simply turn on the fan and make sure that it is operating properly.

Step 6: Enjoy Your New Fan

Congratulations! You have now successfully replaced the motor in your Nutone bathroom fan. Enjoy the fresh, clean air that your new fan will provide.

Tips

If you are not comfortable working with electricity, it is best to hire a qualified electrician to replace the motor for you.
Be sure to purchase the correct size motor for your bathroom fan.
Make sure to connect the wires to the motor in the same way they were connected to the old motor.
Test the fan before you leave the bathroom to make sure that it is operating properly.