How To Replace A Washer In Delta Bathroom Faucet

How to Replace a Washer in a Delta Bathroom Faucet

Delta bathroom faucets are known for their durability and style, but even the best faucets need maintenance from time to time. One common issue is a leaking faucet, which can be caused by a worn-out washer. Replacing a washer is a relatively simple task that can be completed in just a few minutes.

To replace a washer in a Delta bathroom faucet, you will need the following tools:

Phillips head screwdriver
Adjustable wrench
New washer

Once you have gathered your tools, follow these steps:

Turn off the water supply to the faucet. This is usually done by turning the handles clockwise until they stop.
Remove the aerator. The aerator is the small, screen-like device that is attached to the end of the faucet spout. It can be removed by unscrewing it by hand or with an adjustable wrench.
Remove the handle. The handle is usually held in place by a screw or set screw. Remove the screw and pull the handle straight up to remove it.
Remove the cartridge. The cartridge is the part of the faucet that contains the washer. It is usually held in place by a nut or clip. Remove the nut or clip and pull the cartridge straight out.
Replace the washer. The washer is a small, rubber or plastic disc that is located on the bottom of the cartridge. Remove the old washer and replace it with a new one.
Reassemble the faucet. Reverse the steps you took to disassemble the faucet to reassemble it. Be sure to tighten all of the screws and nuts.

Once you have replaced the washer, turn on the water supply and check for leaks. If there are any leaks, tighten the screws and nuts until the leaks stop.

Replacing a washer in a Delta bathroom faucet is a simple task that can be completed in just a few minutes. By following these steps, you can keep your faucet working properly for years to come.