How To Replace An Old Bathroom Sink

How to Replace an Old Bathroom Sink

Replacing an old bathroom sink can be a straightforward task with the right tools and a bit of preparation. Here's a comprehensive guide to help you navigate the process seamlessly:

1. Gather the Necessary Tools and Materials

* Adjustable wrench * Plumber's putty * New bathroom sink * Drain stopper assembly * Cordless drill or screwdriver * Basin wrench * Hacksaw

2. Turn Off the Water Supply

* Locate the water supply valves under the sink and turn them clockwise to shut off the water. * Open the faucet to release any remaining water.

3. Disconnect the Drain Pipes

* Use a basin wrench to loosen the nuts connecting the drain pipes to the sink drain. * Remove the old drain stopper and lift the sink free from the countertop.

4. Remove the Faucets

* Use an adjustable wrench to loosen the nuts securing the faucets to the sink. * Remove the faucets by unscrewing them by hand.

5. Clean the Sink Hole

* Remove any old plumber's putty or debris from the sink hole on the countertop. * Wipe the area clean with a damp cloth to prepare for the new sink.

6. Apply Plumber's Putty

* Roll a rope of plumber's putty and form it into a ring around the drain hole on the bottom of the new sink. * Smoothen the putty to create a watertight seal.

7. Set the New Sink in Place

* Carefully lift the new sink and align it with the sink hole on the countertop. * Gently lower the sink into place, ensuring the plumber's putty forms a seal.

8. Tighten the Drain Pipes

* Slide the drain stopper assembly into place and tighten the nuts connecting the drain pipes to the sink drain.

9. Install the Faucets

* Insert the faucets into the holes in the sink and tighten the nuts by hand as much as possible. * Use an adjustable wrench to further tighten the nuts, but avoid overtightening.

10. Connect the Water Supply

* Turn on the water supply valves under the sink. * Check for any leaks around the drain pipes and faucets. * Tighten the connections as needed to ensure a secure seal.

11. Clean and Caulk

* Wipe down the new sink and countertop to remove any debris or fingerprints. * Apply a bead of caulk around the edge of the sink where it meets the countertop to prevent moisture damage.

12. Enjoy Your New Sink

* Turn on the water and test the functionality of the sink and faucets. * Celebrate your accomplishment and enjoy the fresh, updated look of your bathroom.