How To Replace Bathroom Sink Drain Stopper

How to Replace a Bathroom Sink Drain Stopper

A clogged or broken bathroom sink drain stopper can be a minor annoyance or a major inconvenience. If you're having trouble with your drain stopper, don't despair. Replacing it is a relatively simple task that can be completed in a matter of minutes. Here's a step-by-step guide to help you get the job done.

What You'll Need

New drain stopper
Adjustable wrench
Plumber's putty (optional)

Step 1: Remove the Old Drain Stopper

Start by removing the old drain stopper. To do this, simply use an adjustable wrench to loosen the nut that holds the stopper in place. Once the nut is loose, you can pull the stopper out of the drain.

Step 2: Clean the Drain

Once the old drain stopper is removed, take a few minutes to clean the drain. Remove any hair, soap scum, or other debris that may have accumulated. You can use a drain cleaning brush or a pair of pliers to remove the debris.

Step 3: Apply Plumber's Putty (Optional)

If your new drain stopper has a rubber gasket, you can skip this step. However, if your new drain stopper does not have a gasket, you can apply a small amount of plumber's putty to the bottom of the stopper. This will help to create a watertight seal.

Step 4: Insert the New Drain Stopper

Insert the new drain stopper into the drain. Make sure that the stopper is facing the correct direction. The stopper should have a small tab that fits into a notch in the drain. Once the stopper is in place, tighten the nut that holds it in place. Do not overtighten the nut, as this can damage the stopper or the drain.

Step 5: Test the Drain Stopper

Once the new drain stopper is installed, test it to make sure that it is working properly. Fill the sink with water and then close the stopper. The water should not drain out of the sink. If the water does drain out, check to make sure that the stopper is properly seated in the drain. You may also need to tighten the nut that holds the stopper in place.

Conclusion

Replacing a bathroom sink drain stopper is a simple task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can easily replace your old drain stopper and get your sink working properly again.