How To Replace Kohler Bathroom Faucet Cartridge

How to Replace a Kohler Bathroom Faucet Cartridge

A dripping bathroom faucet is more than just an annoyance; it can waste hundreds of gallons of water annually, driving up your water bill. Most faucet drips are caused by a worn-out cartridge, which is a small, replaceable part that controls the flow of water. Replacing a Kohler bathroom faucet cartridge is a relatively easy task that can be completed in about 30 minutes.

Tools and Materials You'll Need

Before you begin, gather the following tools and materials:

- Replacement Kohler bathroom faucet cartridge
- Adjustable wrench
- Flathead screwdriver
- Bucket or bowl
- Paper towels

Step-by-Step Instructions 1. Turn off the Water Supply

The first step is to turn off the water supply to the faucet. There should be two shut-off valves located under the sink, one for hot water and one for cold water. Turn both valves clockwise to the closed position.

2. Open the Faucet

Open the faucet to release any remaining water in the lines. Once the water has stopped flowing, close the faucet.

3. Remove the Handle

Locate the set screw on the handle and use a flathead screwdriver to loosen it. Once the screw is loose, pull the handle straight up to remove it.

4. Remove the Cap

Underneath the handle, you will see a cap. Use an adjustable wrench to loosen the cap and remove it.

5. Remove the Cartridge

Once the cap is removed, you will be able to see the cartridge. Use an adjustable wrench or cartridge puller to loosen the cartridge and remove it from the faucet body.

6. Install the New Cartridge

Take the new cartridge and insert it into the faucet body. Tighten the cartridge by hand until it is snug. Then, use an adjustable wrench to tighten the cartridge further, but be careful not to overtighten it.

7. Replace the Cap

Screw the cap back onto the faucet body and tighten it with an adjustable wrench.

8. Replace the Handle

Slide the handle back onto the faucet body and tighten the set screw.

9. Turn on the Water Supply

Turn on the water supply valves under the sink. Open the faucet and check for leaks. If there are no leaks, your faucet is now fixed.

Conclusion

Replacing a Kohler bathroom faucet cartridge is a quick and easy way to fix a dripping faucet. By following the steps in this guide, you can save money on your water bill and keep your bathroom faucet in good working order.