How To Replace Pipe In Bathroom Sink

How to Replace Pipe in Bathroom Sink: A Step-by-Step Guide

A leaking or damaged pipe under your bathroom sink can be a major inconvenience. Don't let a dripping tap drive you crazy - learn how to replace the pipe yourself with our easy-to-follow guide.

Before you begin, gather the necessary tools and materials:

Adjustable wrench
Slip joint pliers
Bucket
Plumber's putty
New pipe

Now, let's get started:

1. Turn Off Water Supply: Locate the water supply valves under the sink and turn them off completely. Open the sink faucet to release any remaining water pressure.

2. Disconnect Old Pipe: Use the adjustable wrench to loosen the nuts connecting the old pipe to the faucet and drain. Carefully remove the old pipe.

3. Clean Connection Points: Use a damp cloth to clean the threads on the faucet and drain where the new pipe will be connected.

4. Apply Plumber's Putty: Roll out a small piece of plumber's putty and shape it into a ring. Apply the putty to the threads of the new pipe.

5. Install New Pipe: Hand-tighten the new pipe onto the faucet first, then use the adjustable wrench to further tighten it. Repeat the process for the drain connection.

6. Turn On Water Supply: Slowly turn on the water supply valves and check for leaks. If there are no leaks, the pipe replacement is complete.

7. Clean Up: Wipe away any excess water or putty from around the sink and pipe connections.

Congratulations, you've successfully replaced the pipe under your bathroom sink! Enjoy a leak-free and functioning sink again.