How To Replace Taps On Bathroom Sink

How To Replace Taps On Bathroom Sink: A Comprehensive Guide

Replacing the bathroom sink taps is a straightforward plumbing task that can be easily completed by a homeowner with the right skills, tools, and materials.

Here's a step-by-step guide to help you replace your bathroom sink taps:

1. Gather the Necessary Tools and Materials:

Adjustable wrench
Pliers
Basin wrench
Replacement taps
Plumber's putty
Teflon tape

2. Shut Off the Water Supply:

Locate the shut-off valves under the sink and turn them clockwise to shut off the water supply to the sink.

3. Disconnect the Old Taps:

Use pliers or a basin wrench to loosen the nuts that connect the taps to the water lines.
Remove the nuts by hand or with pliers.
Pull the old taps straight up and out of the sink.

4. Clean the Sink:

Remove any old plumber's putty or debris from the area where the new taps will be installed.

5. Apply Plumber's Putty:

Roll out a small piece of plumber's putty into a rope. Press the rope around the base of the new taps.

6. Install the New Taps:

Insert the new taps into the holes in the sink.
Tighten the nuts that connect the taps to the water lines by hand or with a wrench.
Use a basin wrench to tighten the nuts further, but do not overtighten.

7. Connect the Water Supply:

Turn the shut-off valves under the sink counterclockwise to turn on the water supply.

8. Test the Taps:

Turn on the taps and check for any leaks. If there are leaks, tighten the nuts further.

9. Apply Teflon Tape:

Wrap a few layers of Teflon tape around the threads of the water supply lines.

10. Connect the Water Supply Lines:

Connect the water supply lines to the taps by hand-tightening the nuts.

11. Clean Up:

Remove any excess plumber's putty or water from the sink and surrounding area.

Tips:

If you have difficulty loosening the nuts, apply some penetrating oil to them and let it sit for a while before attempting to loosen them.
Be careful not to overtighten the nuts, as this can damage the taps or the sink.
If you are unsure about any part of the process, consult a qualified plumber.