How To Replace Tiles In Bathroom Floor

How to Replace Bathroom Floor Tiles

Over time, bathroom floor tiles can become damaged, cracked, or simply outdated. Replacing them can give your bathroom a fresh new look and increase its value. While it may seem like a daunting task, replacing bathroom floor tiles is a project that can be completed by most homeowners with the right tools and a little patience.

Here is a step-by-step guide on how to replace bathroom floor tiles:

Step 1: Remove the Old Tiles

The first step is to remove the old tiles. This can be done with a hammer and chisel or a tile removal tool. Start by chipping away at the grout around the tiles. Once the grout is removed, you can begin to pry up the tiles. Be careful not to damage the subfloor.

Step 2: Prepare the Subfloor

Once the old tiles are removed, you need to prepare the subfloor for the new tiles. This may involve leveling the floor, repairing any damage, or installing a new subfloor.

Step 3: Apply Mortar

The next step is to apply mortar to the subfloor. Mortar is a mixture of cement, sand, and water that is used to bond the tiles to the floor. Apply the mortar to the subfloor using a trowel, and then use a notched trowel to create ridges in the mortar.

Step 4: Set the Tiles

Now you can begin to set the tiles. Start by placing a tile in the center of the floor. Then, work your way out from the center, setting the tiles in a straight line. Use a level to ensure that the tiles are level. Tap the tiles into place with a rubber mallet.

Step 5: Grout the Tiles

Once the tiles are set, you need to grout them. Grout is a mixture of cement, sand, and water that is used to fill the spaces between the tiles. Apply the grout to the tiles using a grout float, and then use a sponge to smooth out the grout.

Step 6: Seal the Tiles

The final step is to seal the tiles. This will protect them from water and stains. Apply the sealer to the tiles using a brush or roller, and allow it to dry completely.