How To Take A Bathroom Sink Drain Plug Out

How to Take a Bathroom Sink Drain Plug Out

A clogged bathroom sink can be a frustrating problem. One of the first things you should do is try to remove the drain plug to see if that's the source of the clog. Removing a bathroom sink drain plug is usually a simple task, but it can be tricky if you've never done it before.

In this article, we'll walk you through the steps on how to take a bathroom sink drain plug out. We'll also provide some tips on how to avoid common mistakes.

Step 1: Gather Your Tools

Before you start, you'll need to gather a few tools:

A pair of pliers
A bucket or bowl
A rag or towel

Step 2: Turn Off the Water

Before you remove the drain plug, you'll need to turn off the water supply to the sink. To do this, locate the shutoff valves under the sink and turn them clockwise to close them.

Step 3: Remove the Stopper

The stopper is the part of the drain that blocks the water from flowing out. To remove the stopper, simply lift it straight up. If the stopper is stuck, you can use a pair of pliers to gently pry it loose.

Step 4: Remove the Crossbars

Once the stopper is removed, you'll see two crossbars that hold the drain plug in place. To remove the crossbars, use a pair of pliers to squeeze the tabs on the sides of each crossbar. Once the tabs are released, you can lift the crossbars out.

Step 5: Remove the Drain Plug

Once the crossbars are removed, you can lift the drain plug straight up to remove it.

Step 6: Clean the Drain

Once the drain plug is removed, you can clean the drain to remove any clogs. To do this, use a drain snake or a chemical drain cleaner.

Step 7: Reinstall the Drain Plug

Once the drain is clean, you can reinstall the drain plug. To do this, simply insert the plug into the drain hole and turn it clockwise to tighten it.

Step 8: Turn On the Water

Once the drain plug is reinstalled, you can turn on the water supply to the sink. Check for any leaks and make sure the drain is working properly.

Tips

Here are a few tips to help you avoid common mistakes when removing a bathroom sink drain plug:

Don't use excessive force when removing the drain plug. If the plug is stuck, use a pair of pliers to gently pry it loose.
Make sure the crossbars are completely removed before lifting the drain plug. Otherwise, the drain plug will be difficult to remove.
Be careful not to drop the drain plug into the drain. If you do, you'll have to remove the drain trap to retrieve it.

Removing a bathroom sink drain plug is a simple task that can be completed in a few minutes. By following the steps in this article, you can easily clear a clogged sink and get it working properly again.