How To Take Apart A Moen Bathroom Faucet

How to Take Apart a Moen Bathroom Faucet

Taking apart a Moen bathroom faucet is a relatively simple process that can be completed with a few basic tools. Whether you're replacing a worn-out washer or fixing a leak, understanding the essential aspects of dismantling a Moen faucet will help you get the job done efficiently.

Identify the Parts

Before you begin disassembling the faucet, it's important to identify the different parts involved. Typically, a Moen bathroom faucet consists of the following components:

Faucet handle
Handle stem
Cartridge or washer
Spout
Base plate
Aerator

Tools Required

To take apart a Moen bathroom faucet, you will need the following tools:

Adjustable wrench or pliers
Allen wrench
Phillips screwdriver
Flathead screwdriver

Step-by-Step Guide

Once you have gathered the necessary tools, you can proceed with the following steps to take apart a Moen bathroom faucet:

Turn off the water supply. Locate the shut-off valves under the sink and turn them clockwise to shut off the water supply to the faucet.
Remove the faucet handle. Use a Phillips screwdriver to remove the screws that secure the handle to the stem. Pull the handle straight up to remove it.
Extract the handle stem. Use an Allen wrench to loosen the screw that secures the handle stem to the faucet body. Pull the handle stem straight up to remove it.
Replace the cartridge or washer. If you are replacing a cartridge, simply lift it straight out of the faucet body. If you are replacing a washer, use a flathead screwdriver to pry the old washer off and install the new one.
Reassemble the faucet. Insert the new handle stem into the faucet body and tighten the screw. Install the cartridge or washer by sliding it into place. Replace the handle by pushing it down onto the stem and securing it with the screws.