How To Take Out The Drain In A Bathroom Sink

How to Take Out the Drain in a Bathroom Sink

A clogged bathroom sink is a common plumbing issue that can be easily fixed by removing the drain. The drain is the assembly that allows water to flow from the sink into the pipes below. It consists of a stopper, a strainer, and a tailpiece. The stopper is the part that you push down to close the drain, the strainer is the part that catches hair and other debris, and the tailpiece is the part that connects the drain to the pipes. If your sink is clogged, it is likely that the strainer is blocked. To clean the strainer, you will need to remove the drain.

Removing the drain is a simple process that can be completed in a few minutes. You will need a few tools, including a pair of pliers, a screwdriver, and a bucket.

Step 1: Turn off the water supply to the sink.

There are two water supply lines that run to the sink, one for hot water and one for cold water. Turn off both of these lines by turning the handles clockwise.

Step 2: Open the drain stopper.

If the drain stopper is closed, open it by pushing down on the top of the stopper and turning it counterclockwise.

Step 3: Remove the strainer.

The strainer is held in place by a screw. Use the screwdriver to remove the screw, and then lift the strainer out of the drain.

Step 4: Remove the tailpiece.

The tailpiece is held in place by a slip nut. Use the pliers to loosen the slip nut, and then pull the tailpiece out of the drain.

Step 5: Clean the strainer and the tailpiece.

Use a brush or a sponge to clean the strainer and the tailpiece. Remove any hair or debris that is blocking the flow of water.

Step 6: Reassemble the drain.

Insert the tailpiece into the drain and tighten the slip nut. Insert the strainer into the tailpiece and tighten the screw. Close the drain stopper.

Step 7: Turn on the water supply to the sink.

Turn on both of the water supply lines by turning the handles counterclockwise. Check for leaks around the drain.

If you have followed these steps correctly, you should have successfully removed and cleaned the drain in your bathroom sink. If you are still having problems with your sink, you may need to call a plumber.