How To Unclog Bathroom Sink With Plunger

A clogged bathroom sink is a common plumbing problem that can be easily fixed with a plunger. Plunging is a simple and effective way to clear a clog by using suction to dislodge the blockage.

To unclog a bathroom sink with a plunger, follow these steps:

Remove the stopper. If your sink has a stopper, remove it so that the water can drain freely.
Fill the sink with water. Fill the sink with enough water to cover the plunger cup by about 2 inches.
Position the plunger over the drain. Place the plunger cup over the drain and make sure that it creates a tight seal.
Pump the plunger. Pump the plunger up and down vigorously for 10-15 seconds. This will create suction that will help to dislodge the clog.
Repeat steps 3 and 4. If the clog is not cleared after the first attempt, repeat steps 3 and 4 until the water drains freely.
Flush the drain. Once the clog is cleared, flush the drain with hot water to remove any remaining debris.

If you are unable to unclog the sink with a plunger, you may need to call a plumber. A plumber will have the tools and experience to clear even the most stubborn clogs.

Here are some tips for preventing bathroom sink clogs:

Don't pour grease or oil down the drain. Grease and oil can solidify and clog the drain.
Use a hair catcher. A hair catcher will help to prevent hair from clogging the drain.
Clean the drain regularly. Pour a cup of baking soda down the drain followed by a cup of vinegar. Let it sit for 15 minutes and then flush the drain with hot water.